Funtional Safety for Atex
Productos

DPPI Mini

DPPI Mini

The DPPI has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations.

These infrared gas detectors differ from all other models, because they utilize silicon based solid-state infrared sources. The complete opto-mechanical design and construction is so stable that an ultra-fast speed of response can be achieved whilst providing unparalleled service life and detector stability, thus saving on maintenance and service costs.

We offer the longest combined detector and IR source warranty on the market.

For retrofit applications, a bridge interface is available allowing the detector to be connected directly to catalytic systems, using the existing cabling and control modules.

Supplied with worldwide performance (CSA / CENELEC) and hazardous area approvals.

Suitable for use in SIL 2 and SIL 3 systems.

Compared with catalytic sensors, the DPPI has the following advantages:

  • Presence of oxygen is not required for correct measurement, which makes the DPPI suitable even in an inert gas atmosphere.
  • No possibility of poisoning of the detector since no chemical reaction occurs, i.e. silicon vapors and H2S have no effect on the detector or the measurement.
  • The gas flow rate has no influence on accuracy.
  • There are no saturation effects which could lead to false measurements. Thus, the detector is capable of measuring gas concentrations up to 100% vol.
  • The detector has a continuous self-test function, and reports dirty optics and fault conditions to the control system.
  • Total system costs can be dramatically reduced with the DPPI.
  • High reliability results in low test frequency and no calibration costs.

EQP

EQP

The EQP module is designed to detect equipotentiality during 2 desired points of an installation or a machine by giving a contact in case of a detention of lack of equipotentiality. It can be mounted in electrical cabinets (DIN rail) and its electrical connection is easy.

The EQP module is SIL2 certified according to IEC / EN 61508 and tested at EMC level according to EN 61000-6-1, EN 61000-6-3.

EQP

SMT-mini

SMT-mini

The SMT-Mini system guarantees that the flammable product, liquid or powder, does not circulate in pipes pumps and valves, but has been detected that it is well connected to a ground connection capable of disbanding the static charges that can accumulate on fixed or mobile equipment.

When the interconnection is confirmed with a good impedance value, then the system authorizes the production operations and the circulation of products with risk of explosion. The static electricity generated in the equipment, facilities or tank trucks.

During the transfer or production process, they are immediately evacuated to land. they are immediately put to land.

SMT-mini

CONSENTIMIENTO INFORMADO

Utilizamos cookies propias y de terceros para mejorar nuestros servicios y mostrarle publicidad relacionada con sus preferencias mediante el análisis de sus hábitos de navegación. Si continua navegando, consideramos que acepta su uso. Puede cambiar la configuración u obtener más información en nuestra "política de Cookies".

Aceptar